Presence of hydrogen gas is likely very high. Ventilation should be kept open for all the time. Before starting any maintenance work, proper ventilation should be done.
Normal flash lights or static charge accumulating tools should not be used inside battery room. While attending directly the maintenance of batteries, safety precautions should be taken like aprons, safety goggles preferably helmet with wiser and chemical resistant gloves.
While fastening or loosening battery terminals, always use insulated spanners to avoid short circuit of terminals.
Battery room light fittings will be the type of Exd class fittings. All electrical safety procedures should be followed while attending maintenance/repair of these light fittings. The flame path of the enclosures should not be blocked after the maintenance/repair
Normal flash lights or static charge accumulating tools should not be used inside battery room. While attending directly the maintenance of batteries, safety precautions should be taken like aprons, safety goggles preferably helmet with wiser and chemical resistant gloves.
While fastening or loosening battery terminals, always use insulated spanners to avoid short circuit of terminals.
Battery room light fittings will be the type of Exd class fittings. All electrical safety procedures should be followed while attending maintenance/repair of these light fittings. The flame path of the enclosures should not be blocked after the maintenance/repair
0 comments:
Post a Comment